SAP Fieldglass Connection

SAP Fieldglass Connection

This documentation is based on version 21.0.8257 of the connector.

Getting Started

SAP Fieldglass Version Support

The connector leverages the SAPFieldglass API to enable bidirectional access to SAPFieldglass.

Establishing a Connection

Connecting to SAPFieldglass

To authenticate, you will need to specify the User, Password, APIKey, and EnvironmentURL connection properties.

To obtain an APIKey, log in to the SAP API Business Hub and click on Get API Key.

Important Notes

Stored Procedures

  • The stored procedures features described in this documentation are not currently supported.
  • Because stored procedures are not currently supported, any feature dependent on stored procedures is also currently not supported.

Configuration Files and Their Paths

  • All references to adding configuration files and their paths refer to files and locations on the Jitterbit Harmony Agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the SAP Fieldglass connector.

User Defined Views

The connector allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Proxy

To configure the connector using Private Agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

User Defined Views

The Jitterbit Connector for SAP Fieldglass allows you to define a virtual table whose contents are decided by a pre-configured query. These are called User Defined Views, which are useful in situations where you cannot directly control the query being issued to the driver, e.g. when using the driver from Jitterbit. The User Defined Views can be used to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.

There are two ways to create user defined views:
  • Create a JSON-formatted configuration file defining the views you want.
  • DDL statements.

Defining Views Using a Configuration File

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:
  • Each root element defines the name of a view.
  • Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
	"MyView": {
		"query": "SELECT * FROM AuditTrails WHERE MyColumn = 'value'"
	},
	"MyView2": {
		"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
	}
}
Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:
"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"

Schema for User Defined Views

User Defined Views are exposed in the UserViews schema by default. This is done to avoid the view's name clashing with an actual entity in the data model. You can change the name of the schema used for UserViews by setting the UserViewsSchemaName property.

Working with User Defined Views

For example, a SQL statement with a User Defined View called UserViews.RCustomers only lists customers in Raleigh:
SELECT * FROM Customers WHERE City = 'Raleigh';
An example of a query to the driver:
SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';
Resulting in the effective query to the source:
SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';
That is a very simple example of a query to a User Defined View that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.

SSL Configuration

Customizing the SSL Configuration

By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Data Model

The Jitterbit Connector for SAP Fieldglass models SAP Fieldglass objects as relational tables and views. A SAP Fieldglass object has relationships to other objects; in the tables, these relationships are expressed through foreign keys. The following sections show the available API objects and provide more information on executing SQL to SAP Fieldglass APIs.

Schemas for most database objects are defined in simple, text-based configuration files.

The connector offloads as much of the SELECT statement processing as possible to the SAP Fieldglass APIs and then processes the rest of the query in memory. See SupportEnhancedSQL for more information on how the connector circumvents API limitations with in-memory client-side processing. You can turn off client-side execution by setting SupportEnhancedSQL to false in which case any search criteria that refers to other columns will result in unfiltered data being pushed.

Selecting From Reports in SAP Fieldglass

The connector offers the possibility to select reports as relational views.

Selecting data from your reports

To access the data from your reports, query a view with the reports name. All the possible views can be seen using the sys_views system table.

SELECT * FROM [Job Posting Report 1]

Views

Views are composed of columns and pseudo columns. Views are similar to tables in the way that data is represented; however, views do not support updates. Entities that are represented as views are typically read-only entities. Often, a stored procedure* is available to update the data if such functionality is applicable to the data source.

Queries can be executed against a view as if it were a normal table, and the data that comes back is similar in that regard. To find out more about tables and stored procedures, please navigate to their corresponding entries in this help document.

Jitterbit Connector for SAP Fieldglass Views

Name Description
Approvals Query this table for approvals in SAPFieldglass.
AuditTrails Query this table for audit trails in SAPFieldglass.
RejectReasons Query this table for reject reasons in SAPFieldglass.

Approvals

Query this table for approvals in SAPFieldglass.

View Specific Information

The connector will use the SAP Fieldglass API to process WHERE clause conditions built with the following columns and operators. The remaining filter criteria is executed client-side within the connector.

  • ModuleId supports the '=' operator.
  • WorkItemId supports the '=' operator. This must be used alongside ModuleId.

For example, the following queries are processed server-side:

SELECT * FROM Approvals WHERE ModuleId='70'
SELECT * FROM Approvals WHERE ModuleId='70' AND WorkItemId='300'

Columns

Name Type Description
Id [KEY] String The ID of the approval.
ModuleId String The ID of the module this approval belongs to.
ModuleName String The name of the module this approval belongs to.
Ref String The reference of the approval.
Uom String The unit of measure of the approval.
Name String The name of the approval.
Amount Double The amount of the approval.
StartDate Date The start date of the approval.
EndDate Date The end date of the approval.
CreateDate Date The created date of the approval.
CreatorName String The name of the approval's creator.
UniqueName String The unique name of the approval's creator.
EmailId String The ID of the email of this approval.
RefVersion Integer The ref version of this approval.
ValidObject Boolean Indicates whether this approval is a valid object or not.
WorkerType String The type of the worker.
WorkerTypeLabel String The label of the worker type.
SourceLink String The source link of the approval.
Others String An aggregate of other properties for this approval.
Status String The status of this approval.
Details String The details of this approval.
ActivityID String The ID of the approval's activity.

Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.

Name Type Description
WorkItemId String The WorkItem ID you want to filter approvals with. This must be used in conjunction with ModuleId.

AuditTrails

Query this table for audit trails in SAPFieldglass.

View Specific Information

The connector will use the SAP Fieldglass API to process WHERE clause conditions built with the following column and operator. The remaining filter criteria is executed client-side within the connector.

  • Status supports the '=' operator.

For example, the following query is processed server-side:

SELECT * FROM AuditTrails WHERE Status='OK'

Columns

Name Type Description
Id [KEY] String The ID of the audit trail.
Category String The category of the audit trail.
Company String The company of the audit trail.
Details String The details of the audit trail.
Status String The status of the audit trail.

The allowed values are OK, Error.

Type String The type of the audit trail.
User String The user of the audit trail.
StartTime Datetime The start time of the audit trail.
StopTime Datetime The stop time of the audit trail.
PassportActionType Integer The action type of the audit trail's passport.
PassportComponentType Integer The component type of the audit trail's passport.
PassportTransactionId String The transaction ID of the audit trail's passport.
Version String The version of the audit trail.
Activity String The activity of the audit trail.
CompanyAttribute String The company attribute of the audit trail.
DocumentStatus String The document status of the audit trail.
ClientMessage String The client message of the audit trail.
ClientReturnCode Integer The client return code of the audit trail.
CRC32Checksum String The CRC32 checksum of the audit trail.
DeliveryTime Integer The delivery time of the audit trail.
DeliveryStatus String The delivery status of the audit trail.
Duration Datetime The duration of the audit trail.
Message Boolean The message of the audit trail.
RecordsFailed String The number of the audit trail's failed records.
RecordsProcessed String The number of the audit trail's processed records.
ServerMessage String The server message of the audit trail.
ServerStatus String The server status of the audit trail.
UploadFile String The uploaded file of the audit trail.

RejectReasons

Query this table for reject reasons in SAPFieldglass.

View Specific Information

The connector will use the SAP Fieldglass API to process WHERE clause conditions built with the following column and operator. The remaining filter criteria is executed client side within the connector.

  • ModuleId supports the '=' operator.

For example, the following query is processed server-side:

SELECT * FROM RejectReasons WHERE ModuleId='70'

Columns

Name Type Description
Id [KEY] String The ID of the reject reason.
ModuleId String The ID of the reject reason's module.
ModuleName String The name of the reject reason's module.
Description String The description of this reject reason.
RefVersion Integer The ref version of this reject reason.
ValidObject Boolean Indicates whether this approval is a valid object or not.
Status String The status of this reject reason.
Details String The details of this reject reason.

Stored Procedures

NOTE: Stored procedures are not currently supported. See the above note for details.

Stored procedures* are available to complement the data available from the Data Model. It may be necessary to update data available from a view using a stored procedure* because the data does not provide for direct, table-like, two-way updates. In these situations, the retrieval of the data is done using the appropriate view or table, while the update is done by calling a stored procedure. Stored procedures* take a list of parameters and return back a dataset that contains the collection of tuples that constitute the response.

Jitterbit Connector for SAP Fieldglass Stored Procedures

Name Description
ModifyItem Approve or reject an item.

ModifyItem

Approve or reject an item.

Input

Name Type Required Description
ModuleId String True The ID of the module.
WorkItemId String True The ID of the work item.
Action String True The action to take on the work item. If it is set to 'reject', then the reasonId is required.

The allowed values are approve, reject.

Comments String False Any comments about the action.
ReasonId String False The reason ID for the rejection. This is required when the action is reject.

Result Set Columns

Name Type Description
Success Boolean Indicates whether the operation completed successfully.

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for SAP Fieldglass:

Data Source Tables

The following tables return information about how to connect to and query the data source:

  • sys_connection_props: Returns information on the available connection properties.
  • sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

  • sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

Name Type Description
CatalogName String The database name.

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas

Columns

Name Type Description
CatalogName String The database name.
SchemaName String The schema name.

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables

Columns

Name Type Description
CatalogName String The database containing the table or view.
SchemaName String The schema containing the table or view.
TableName String The name of the table or view.
TableType String The table type (table or view).
Description String A description of the table or view.
IsUpdateable Boolean Whether the table can be updated.

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the AuditTrails table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='AuditTrails' 

Columns

Name Type Description
CatalogName String The name of the database containing the table or view.
SchemaName String The schema containing the table or view.
TableName String The name of the table or view containing the column.
ColumnName String The column name.
DataTypeName String The data type name.
DataType Int32 An integer indicating the data type. This value is determined at run time based on the environment.
Length Int32 The storage size of the column.
DisplaySize Int32 The designated column's normal maximum width in characters.
NumericPrecision Int32 The maximum number of digits in numeric data. The column length in characters for character and date-time data.
NumericScale Int32 The column scale or number of digits to the right of the decimal point.
IsNullable Boolean Whether the column can contain null.
Description String A brief description of the column.
Ordinal Int32 The sequence number of the column.
IsAutoIncrement String Whether the column value is assigned in fixed increments.
IsGeneratedColumn String Whether the column is generated.
IsHidden Boolean Whether the column is hidden.
IsArray Boolean Whether the column is an array.

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures

Columns

Name Type Description
CatalogName String The database containing the stored procedure.
SchemaName String The schema containing the stored procedure.
ProcedureName String The name of the stored procedure.
Description String A description of the stored procedure.
ProcedureType String The type of the procedure, such as PROCEDURE or FUNCTION.

sys_procedureparameters

Describes stored procedure* parameters.

The following query returns information about all of the input parameters for the SampleProcedure stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName='SampleProcedure' AND Direction=1 OR Direction=2

Columns

Name Type Description
CatalogName String The name of the database containing the stored procedure.
SchemaName String The name of the schema containing the stored procedure.
ProcedureName String The name of the stored procedure* containing the parameter.
ColumnName String The name of the stored procedure* parameter.
Direction Int32 An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters.
DataTypeName String The name of the data type.
DataType Int32 An integer indicating the data type. This value is determined at run time based on the environment.
Length Int32 The number of characters allowed for character data. The number of digits allowed for numeric data.
NumericPrecision Int32 The maximum precision for numeric data. The column length in characters for character and date-time data.
NumericScale Int32 The number of digits to the right of the decimal point in numeric data.
IsNullable Boolean Whether the parameter can contain null.
IsRequired Boolean Whether the parameter is required for execution of the procedure.
IsArray Boolean Whether the parameter is an array.
Description String The description of the parameter.
Ordinal Int32 The index of the parameter.

sys_keycolumns

Describes the primary and foreign keys. The following query retrieves the primary key for the AuditTrails table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='AuditTrails' 

Columns

Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
IsKey Boolean Whether the column is a primary key in the table referenced in the TableName field.
IsForeignKey Boolean Whether the column is a foreign key referenced in the TableName field.
PrimaryKeyName String The name of the primary key.
ForeignKeyName String The name of the foreign key.
ReferencedCatalogName String The database containing the primary key.
ReferencedSchemaName String The schema containing the primary key.
ReferencedTableName String The table containing the primary key.
ReferencedColumnName String The column name of the primary key.

sys_foreignkeys

Describes the foreign keys. The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'

Columns

Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
PrimaryKeyName String The name of the primary key.
ForeignKeyName String The name of the foreign key.
ReferencedCatalogName String The database containing the primary key.
ReferencedSchemaName String The schema containing the primary key.
ReferencedTableName String The table containing the primary key.
ReferencedColumnName String The column name of the primary key.
ForeignKeyType String Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key.

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'

Columns

Name Type Description
CatalogName String The name of the database containing the index.
SchemaName String The name of the schema containing the index.
TableName String The name of the table containing the index.
IndexName String The index name.
ColumnName String The name of the column associated with the index.
IsUnique Boolean True if the index is unique. False otherwise.
IsPrimary Boolean True if the index is a primary key. False otherwise.
Type Int16 An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3).
SortOrder String The sort order: A for ascending or D for descending.
OrdinalPosition Int16 The sequence number of the column in the index.

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

When querying this table, the config connection string should be used:

jdbc:cdata:sapfieldglass:config:

This connection string enables you to query this table without a valid connection.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

Name Type Description
Name String The name of the connection property.
ShortDescription String A brief description.
Type String The data type of the connection property.
Default String The default value if one is not explicitly set.
Values String A comma-separated list of possible values. A validation error is thrown if another value is specified.
Value String The value you set or a preconfigured default.
Required Boolean Whether the property is required to connect.
Category String The category of the connection property.
IsSessionProperty String Whether the property is a session property, used to save information about the current connection.
Sensitivity String The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms.
PropertyName String A camel-cased truncated form of the connection property name.
Ordinal Int32 The index of the parameter.
CatOrdinal Int32 The index of the parameter category.
Hierarchy String Shows dependent properties associated that need to be set alongside this one.
Visible Boolean Informs whether the property is visible in the connection UI.
ETC String Various miscellaneous information about the property.

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Collaborative Query Processing

When working with data sources that do not support SQL-92, you can query the sys_sqlinfo view to determine the query capabilities of the underlying APIs, expressed in SQL syntax. The connector offloads as much of the SELECT statement processing as possible to the server and then processes the rest of the query in memory.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. The following result set indicates the SELECT functionality that the connector can offload to the data source or process client side. Your data source may support additional SQL syntax. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

NameDescriptionPossible Values
AGGREGATE_FUNCTIONSSupported aggregation functions.AVG, COUNT, MAX, MIN, SUM, DISTINCT
COUNTWhether COUNT function is supported.YES, NO
IDENTIFIER_QUOTE_OPEN_CHARThe opening character used to escape an identifier.[
IDENTIFIER_QUOTE_CLOSE_CHARThe closing character used to escape an identifier.]
SUPPORTED_OPERATORSA list of supported SQL operators.=, >, <, >=, <=, <>, !=, LIKE, NOT LIKE, IN, NOT IN, IS NULL, IS NOT NULL, AND, OR
GROUP_BYWhether GROUP BY is supported, and, if so, the degree of support.NO, NO_RELATION, EQUALS_SELECT, SQL_GB_COLLATE
STRING_FUNCTIONSSupported string functions.LENGTH, CHAR, LOCATE, REPLACE, SUBSTRING, RTRIM, LTRIM, RIGHT, LEFT, UCASE, SPACE, SOUNDEX, LCASE, CONCAT, ASCII, REPEAT, OCTET, BIT, POSITION, INSERT, TRIM, UPPER, REGEXP, LOWER, DIFFERENCE, CHARACTER, SUBSTR, STR, REVERSE, PLAN, UUIDTOSTR, TRANSLATE, TRAILING, TO, STUFF, STRTOUUID, STRING, SPLIT, SORTKEY, SIMILAR, REPLICATE, PATINDEX, LPAD, LEN, LEADING, KEY, INSTR, INSERTSTR, HTML, GRAPHICAL, CONVERT, COLLATION, CHARINDEX, BYTE
NUMERIC_FUNCTIONSSupported numeric functions.ABS, ACOS, ASIN, ATAN, ATAN2, CEILING, COS, COT, EXP, FLOOR, LOG, MOD, SIGN, SIN, SQRT, TAN, PI, RAND, DEGREES, LOG10, POWER, RADIANS, ROUND, TRUNCATE
TIMEDATE_FUNCTIONSSupported date/time functions.NOW, CURDATE, DAYOFMONTH, DAYOFWEEK, DAYOFYEAR, MONTH, QUARTER, WEEK, YEAR, CURTIME, HOUR, MINUTE, SECOND, TIMESTAMPADD, TIMESTAMPDIFF, DAYNAME, MONTHNAME, CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP, EXTRACT
REPLICATION_SKIP_TABLESIndicates tables skipped during replication.
REPLICATION_TIMECHECK_COLUMNSA string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication.
IDENTIFIER_PATTERNString value indicating what string is valid for an identifier.
SUPPORT_TRANSACTIONIndicates if the provider supports transactions such as commit and rollback.YES, NO
DIALECTIndicates the SQL dialect to use.
KEY_PROPERTIESIndicates the properties which identify the uniform database.
SUPPORTS_MULTIPLE_SCHEMASIndicates if multiple schemas may exist for the provider.YES, NO
SUPPORTS_MULTIPLE_CATALOGSIndicates if multiple catalogs may exist for the provider.YES, NO
DATASYNCVERSIONThe Data Sync version needed to access this driver.Standard, Starter, Professional, Enterprise
DATASYNCCATEGORYThe Data Sync category of this driver.Source, Destination, Cloud Destination
SUPPORTSENHANCEDSQLWhether enhanced SQL functionality beyond what is offered by the API is supported.TRUE, FALSE
SUPPORTS_BATCH_OPERATIONSWhether batch operations are supported.YES, NO
SQL_CAPAll supported SQL capabilities for this driver.SELECT, INSERT, DELETE, UPDATE, TRANSACTIONS, ORDERBY, OAUTH, ASSIGNEDID, LIMIT, LIKE, BULKINSERT, COUNT, BULKDELETE, BULKUPDATE, GROUPBY, HAVING, AGGS, OFFSET, REPLICATE, COUNTDISTINCT, JOINS, DROP, CREATE, DISTINCT, INNERJOINS, SUBQUERIES, ALTER, MULTIPLESCHEMAS, GROUPBYNORELATION, OUTERJOINS, UNIONALL, UNION, UPSERT, GETDELETED, CROSSJOINS, GROUPBYCOLLATE, MULTIPLECATS, FULLOUTERJOIN, MERGE, JSONEXTRACT, BULKUPSERT, SUM, SUBQUERIESFULL, MIN, MAX, JOINSFULL, XMLEXTRACT, AVG, MULTISTATEMENTS, FOREIGNKEYS, CASE, LEFTJOINS, COMMAJOINS, WITH, LITERALS, RENAME, NESTEDTABLES, EXECUTE, BATCH, BASIC, INDEX
PREFERRED_CACHE_OPTIONSA string value specifies the preferred cacheOptions.
ENABLE_EF_ADVANCED_QUERYIndicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side.YES, NO
PSEUDO_COLUMNSA string array indicating the available pseudo columns.
MERGE_ALWAYSIf the value is true, The Merge Mode is forcibly executed in Data Sync.TRUE, FALSE
REPLICATION_MIN_DATE_QUERYA select query to return the replicate start datetime.
REPLICATION_MIN_FUNCTIONAllows a provider to specify the formula name to use for executing a server side min.
REPLICATION_START_DATEAllows a provider to specify a replicate startdate.
REPLICATION_MAX_DATE_QUERYA select query to return the replicate end datetime.
REPLICATION_MAX_FUNCTIONAllows a provider to specify the formula name to use for executing a server side max.
IGNORE_INTERVALS_ON_INITIAL_REPLICATEA list of tables which will skip dividing the replicate into chunks on the initial replicate.
CHECKCACHE_USE_PARENTIDIndicates whether the CheckCache statement should be done against the parent key column.TRUE, FALSE
CREATE_SCHEMA_PROCEDURESIndicates stored procedures* that can be used for generating schema files.

The following query retrieves the operators that can be used in the WHERE clause:
SELECT * FROM sys_sqlinfo WHERE Name='SUPPORTED_OPERATORS'
Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

Name Type Description
NAME String A component of SQL syntax, or a capability that can be processed on the server.
VALUE String Detail on the supported SQL or SQL syntax.

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity

Columns

Name Type Description
Id String The database-generated ID returned from a data modification operation.
Batch String An identifier for the batch. 1 for a single operation.
Operation String The result of the operation in the batch: INSERTED, UPDATED, or DELETED.
Message String SUCCESS or an error message if the update in the batch failed.

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication


PropertyDescription
EnvironmentURLThe Environment URL where the instance of SAP Fieldglass is located.
UserThe SAP Fieldglass user account used to authenticate.
PasswordThe password used to authenticate the user.
APIKeyThe API Key used to authenticate to SAP Fieldglass.

SSL


PropertyDescription
SSLServerCertThe certificate to be accepted from the server when connecting using TLS/SSL.

Schema


PropertyDescription
LocationA path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemasThis property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
TablesThis property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
ViewsRestricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Miscellaneous


PropertyDescription
MaxRowsLimits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.
OtherThese hidden properties are used only in specific use cases.
PseudoColumnsThis property indicates whether or not to include pseudo columns as columns to the table.
TimeoutThe value in seconds until the timeout error is thrown, canceling the operation.
UseSimpleNamesBoolean determining if simple names should be used for tables and columns.

Authentication

This section provides a complete list of authentication properties you can configure.


PropertyDescription
EnvironmentURLThe Environment URL where the instance of SAP Fieldglass is located.
UserThe SAP Fieldglass user account used to authenticate.
PasswordThe password used to authenticate the user.
APIKeyThe API Key used to authenticate to SAP Fieldglass.

EnvironmentURL

The Environment URL where the instance of SAP Fieldglass is located.

Data Type

string

Default Value

""

Remarks

The Environment URL where the instance of SAP Fieldglass is located.

User

The SAP Fieldglass user account used to authenticate.

Data Type

string

Default Value

""

Remarks

Together with Password, this field is used to authenticate against the SAP Fieldglass server.

Password

The password used to authenticate the user.

Data Type

string

Default Value

""

Remarks

The User and Password are together used to authenticate with the server.

APIKey

The API Key used to authenticate to SAP Fieldglass.

Data Type

string

Default Value

""

Remarks

The API Key used to authenticate to SAP Fieldglass.

SSL

This section provides a complete list of SSL properties you can configure.


PropertyDescription
SSLServerCertThe certificate to be accepted from the server when connecting using TLS/SSL.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description Example
A full PEM Certificate (example shortened for brevity) -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate C:\cert.cer
The public key (example shortened for brevity) -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB

-----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated) ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated) 34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.


PropertyDescription
LocationA path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemasThis property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
TablesThis property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
ViewsRestricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

"%APPDATA%\\SAPFieldglass Data Provider\Schema"

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\\SAPFieldglass Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

Platform %APPDATA%
Windows The value of the APPDATA environment variable
Mac ~/Library/Application Support
Linux ~/.config

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.


PropertyDescription
MaxRowsLimits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.
OtherThese hidden properties are used only in specific use cases.
PseudoColumnsThis property indicates whether or not to include pseudo columns as columns to the table.
TimeoutThe value in seconds until the timeout error is thrown, canceling the operation.
UseSimpleNamesBoolean determining if simple names should be used for tables and columns.

MaxRows

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

DefaultColumnSizeSets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMTDetermines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filenameRecords the underlying socket data transfer to the specified file.

PseudoColumns

This property indicates whether or not to include pseudo columns as columns to the table.

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Timeout

The value in seconds until the timeout error is thrown, canceling the operation.

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector throws an exception.

UseSimpleNames

Boolean determining if simple names should be used for tables and columns.

Data Type

bool

Default Value

false

Remarks

SAP Fieldglass tables and columns can use special characters in names that are normally not allowed in standard databases. UseSimpleNames makes the connector easier to use with traditional database tools.

Setting UseSimpleNames to true will simplify the names of tables and columns returned. It will enforce a naming scheme such that only alphanumeric characters and the underscore are valid for the displayed table and column names. Any nonalphanumeric characters will be converted to an underscore.

Copyright © 2022-2023 Jitterbit, Inc. All rights reserved.